A bipolar junction transistor is equivalent to two back-to-back diode PN junctions. The forward biased EB junction injects holes from the emitter into the base region, most of which can reach the boundary of the collector junction and reach the collector region under the action of the reverse biased CB junction potential barrier electric field, forming a collector current IC.
Categories：Product knowledge Date：2025-02-18 Hits：402 View »
Any asynchronous DC/DC converter requires a so-called freewheeling diode. In order to optimize the overall efficiency of the solution, it is usually preferred to choose Schottky diodes with low forward voltage. Many designs use diodes recommended by a converter design (network) tool.
Categories：Product knowledge Date：2025-02-17 Hits：494 View »
The Schottky diode is named after its inventor, Dr. Schottky, and is the abbreviation for Schottky Barrier Diode (SBD)
Categories：Product knowledge Date：2025-02-17 Hits：1018 View »
The function of ESD protection components is to transfer ESD stress from sensitive components, allowing current to flow through the protection components rather than the sensitive components, while maintaining low voltage on the sensitive components; ESD protection components should also have low leakage and low capacitance characteristics, without reducing circuit functionality; It will not cause damage to high-speed signals, and the function of protecting components under multiple stresses wil
Categories：Product knowledge Date：2025-02-17 Hits：489 View »
Zener diode (also known as Zener diode) is a single PN junction diode used for stabilizing voltage.
Categories：Product knowledge Date：2025-02-14 Hits：533 View »
Zener diode (also known as Zener diode) is a semiconductor device that has high resistance until the critical reverse breakdown voltage. At this critical breakdown point, the reverse resistance decreases to a very small value, and in this low resistance region, the current increases while the voltage remains constant.
Categories：Product knowledge Date：2025-02-14 Hits：454 View »
Transient Voltage Suppressor (TVS), abbreviated as TVS, is a high-performance protective device in the form of a diode.
Categories：Product knowledge Date：2025-02-13 Hits：608 View »
A bridge stack is an electronic component composed of multiple diodes inside. The main function is rectification, adjusting the direction of current.
Categories：Product knowledge Date：2025-02-13 Hits：550 View »
TVS diode, also known as transient suppression diode, is a widely used new type of high-efficiency circuit protection device, which has extremely fast response time (sub nanosecond level) and considerable surge absorption capability.
Categories：Product knowledge Date：2025-02-13 Hits：554 View »
The main characteristic of a diode is its unidirectional conductivity, which means that under the action of forward voltage, the on resistance is very small; Under the action of reverse voltage, the conduction resistance is extremely high or infinite.
Categories：Product knowledge Date：2025-02-12 Hits：480 View »
